RCBS Rock Chucker Supreme

(No reviews yet) Write a Review
Free Shipping
MSRP: £575.00
— You save £80.00



RCBS Rock Chucker Supreme

Available now at Bradford Stalker, RCBS have taken the new benchmark of single stage presses and surrounded it with everything you need (except for dies and shell holders) to start reloading your ammunition like a pro. A simple solution for beginner and pro alike, it’s easily upgraded to progressive operation with the optional Piggyback 4.

So when it comes to reloading, we advise you take a good look at this fantastic RCBS product

RCBS Rock Chucker Kit Includes

  • 1. Rock Chucker Supreme single stage press

This press is by far the single biggest piece of equipment involved. The press is used to resize the brass cases, replace the fired primers and seat the bullet.

  • 2. 5-0-5 Mechanical scale

The accurate measurement of powder charges is vital to hand loading. The 5-0-5 Scale is built specifically for this delicate job. It has a capacity of 511 grains and can be used with the Uniflow Powder Measure.

  • 3. Uniflow Powder Measure

The Uniflow can greatly speed up the powder charging step. A predetermined charge of powder can be dispensed quickly and easily with each crank of the handle. This eliminates the need to weigh every single load.

  • 4. Speer Loading Manual

This manual is the complete, step-by-step, top rated reference for everything you want to know about hand loading. It contains over 600 pages of information, data and illustrations.

  • 5. Case Lube Kit

One of the first steps in the hand loading is to carefully clean and lubricate the fired cases. This kit contains a bottle of our Case Lube 2, a case lube pad and two case neck brushes with an accessory handle.

  • 6. Hand Priming Tool

Our hand priming tool not only seats primers quickly, it’s also the safest. A patented safety mechanism separates the seating operation from the primer supply, virtually eliminating the possibility of tray detonation. Fits in your hand for portable primer seating. Primer tray installation requires no contact with the primers. Uses the same shell holders (post 1980) as RCBS presses. Made of durable cast metal. Features large and small primer plugs. Shell holders not included

  • 7. Powder Funnel

A funnel is handy for pouring the correct powder charge into the case. It is specially designed to avoid powder spills around the case mouth.

  • 8. Debur Tool

Although small, this important item removes the burrs left on the case after trimming and slightly bevels the inside edge of the case mouth.

  • 9. Hex Wrench Set

This wrench features 8 heat-treated hex keys in one compact unit. It fits most hex-type setscrews on RCBS equipment.

  • 10. Case Loading Block

A convenient holding platform for up to 40 cases. It’s perfect for holding cases during the powder charging process.

Please contact us if you have any questions about the RCBS Rock Chucker Supreme

View AllClose

0 Reviews

View AllClose