Pulsar Helion 2 XP50

(No reviews yet) Write a Review
Shipping:
Free Shipping
  • pulsar helion 2 xp50
  • pulsar helion 2 xp50
£3,399.95
Frequently bought together:

Description

The Pulsar Helion 2 XP50 has a generation 2 thermal sensor, providing even more detail in challenging environmental conditions such as cold mornings, rain or fog with its new 40mK Thermal Sensor.

Most thermal users understand the sensor resolution of a scope, e.g. 640x480, and also pixel pitch, e.g. 17µm. The improvement of these new Pulsar Helion 2 devices concentrate on a key specification of thermal sensor technology called NETD. The NETD (Noise Equivalent of Temperature Differential), expressed in millikelvins (mK) is probabley the most critical parameter for thermal sensors as it describes how sensitivite they are. The lower NETD, the higher the sensitivity. In the current Helion, Trail and Accolade models the NETD value was sub 60mK. The new 40mK sensor, exclusively built by ULIS for Pulsar puts these scopes at the very forefront of the market as all feature much better image delivery in low-temperature conditions such as during rainfall, fog or cold mornings. These conditions prove to be the most difficult for thermal image scopes. The Helion 2 XP50 features a 640x480 17µm thermal sensor and an F50/1.2 lens that provides a detection range up to 1800m. The lens is interchangeable with an F38/1.2 lens which allows the scope to satisfy the need to have a spotter with a wide field of view (with the 38mm lens fitted) or by switching the lens, a high magnification unit (with a 50mm lens fitted).

Pulsar Helion 2 Series Features

  • Long detection range
  • High magnification
  • Step-Up digital zoom
  • Frost-Resistant AMOLED display
  • 50Hz Refresh rate
  • Focusable lens
  • Dioptre control
  • 8 Colour modes
  • “Display Off” mode
  • PiP mode
  • Built-In photo & video recorder
  • 16GB internal memory
  • Stream Vision compatible
  • User-Friendly controls
  • Stadiametric rangefinder
  • IPX7
  • Wide operating temperature (-25°C to 50°C)
  • Four observation modes (Forest, Rocks, Identification and User)
  • Three calibration modes (Manual, semi-auto, auto)
  • Pixel correction
  • Quick-Change, rechargeable IPS5 battery pack
  • MicroUSB port
  • Retained lens cap
  • IPS Battery charger
  • Interchangeable lens (XP models)
  • Image Boost Technology
View AllClose

0 Reviews

View AllClose