Pulsar Axion LRF XQ38
- Free Shipping
The Pulsar Axion LRF XQ38 Thermal Imaging Monocular offers its user highly detailed thermal imaging observation & recording within an ultra-compact and lightweight format. This model has a detection range of up to 1350m and a native magnification of 3.5x, with 4x digital zoom for a total of 14.0x magnification.
The Axion LRF XQ38 features a 384x288 17µm <40mK NETD thermal sensor. The NETD (Noise Equivalent of Temperature Differential), expressed in millikelvins (mK) is one of the most important parameters for thermal sensors as it describes their sensitivity. The lower the NETD value, the higher the sensitivity.
In existing Helion, Trail and Accolade and Axion series models the NETD value was sub 60mK. The new <40mK sensor, exclusively manufactured by ULIS for Pulsar puts Pulsar devices at the forefront of the market with the devices all featuring a better image in conditions where there is a low-temperature difference such as during rainfall, fog or cold mornings. These environmental conditions are the most difficult for thermal imagers and this new sensor will provide a clearer image for users.
The Axion LRF XQ38 is perfectly suited to outdoor conditions, with a robust magnesium bodyshell, an IPX7 protection rating (fully waterproof), 1024x768 AMOLED HD micro-display and can perform in both hot & freezing temperatures.
The Axion LRF XQ38 benefits from all the features of the standard Axion XQ38 but with a built-in eyesafe 1000m Laser Rangefinder to help users accurately measure the distance of targets. With an accuracy of ±1m at 1000m, the laser rangefinder can take a single measurement or scan a moving target. Additionally, the unit has up to eight colour palettes to help enhance observation in varying conditions.
The Axion has an instant start-up and an instant ‘display-off’ mode, which helps to save energy and prolong the operation time of the unit and its dedicated B-Pack Mini Power System. The APS5 Battery Pack system offers an ultra-lightweight, quick-change power option that provides hours of operating time. APS Battery Packs can be charged by USB through its intended unit or an APS Battery Charger. (Please note that the Axion XQ38 & LRF XQ38 utilise a different battery & charger to the rest of the Axion Series)
Pulsar Axion LRF XQ38 Features
- Small pocket-sized format
- Long detection range
- High magnification
- Smooth digital zoom
- HD Frost-Resistant display
- Focusable lens
- Dioptre control
- PiP mode
- 8 Colour modes
- Instant Start-Up & "Display Off" mode
- User friendly controls
- Built-In laser rangefinder (Axion LRF XQ38)
- Wide operating temperature
- Multiple observation modes
- Three calibration modes (Manual, semi-auto, auto)
- Pixel correction
- Quick-Change, rechargeable APS5 battery pack
- MicroUSB port
- Image Boost Technology